SOMFY Telis 4 RTS Operating And Installation Manual page 15

Press the Down button on the new Telis
-
4 RTS:
If the product is lowered, the
-
Telis 1 RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
Replace the original control point front
-
cover:
One-touch point with a white and grey front
cover
Insert the mounting lugs into their
-
notches on one side of the front
cover.
Press on the other side until it clicks,
-
to fix the front cover in its bracket.
One-touch point with a white front cover
Refit the front cover on its bracket.
-
Model B:
Remove the battery from the original
-
control point using a plastic object.
Press on the centre section of the one-
-
touch point button.
Refit the battery in the base of its brac-
-
ket (with text legible).
Press the button again until the product
-
moves briefly (or there is a series of
3 beeps): the programming function is
activated for approximately 2 minutes.
Take the new Telis 4 RTS.
-
Press the Selection button (E) to light
-
up the indicator light that corresponds
to the channel to which the product will
be associated.
Copyright © 2008 Somfy SAS. All rights reserved.
E
Telis 4 RTS
15