User Manual Somfy hereby declares that this product conforms to the essential requirements and other relevant provisions of Directive 1999/5/CE. A declaration of conformity is available at www.somfy.com/ce. Images are not contractually binding. Caution! Note US products (With FCC ID on the label product) : This device complies with Part 15 of the FCC Rules.
5.5. Programming the days of the week 1. Introduction The Telis 6 Chronis RTS remote control transmitter allows you to control up to 6 end-products or groups of end-products using Radio Technology Somfy (RTS). The Telis 6 Chronis RTS can be used in 2 ways: in either manual or automatic mode.
Telis 6 Chronis RTS b Wall mount with screw cap c Screw kit d AAA (LR3) batteries 4. The Telis 6 Chronis RTS in detail Red indicator light (radio transmission indicator) Selection button ( Arrow buttons ( or )
Telis 1 RTS type control point and that the limit switches of each motor are set. However, like any RTS remote control transmitter, the Telis 6 Chronis RTS can be used for motor commissioning operations (limit switch adjustment, etc.).
Page 6
Only confirmed parameters are saved. * Location of residence The Telis 6 Chronis RTS is factory-configured to automatically switch between summer time and winter time based on the location of residence. Select the location of residence as Europe (EU) or the United States (US), or choose OFF to deactivate the automatic time change function and to make the change manually.
5.3.1. Naming a channel Channels can only be named in manual mode. Make sure that the Telis 6 Chronis RTS is in manual mode (if it is in automatic mode, briefly press the selection button ( ) to switch to manual mode).
5.5. Programming the days of the week The Telis 6 Chronis RTS can automatically send orders to one or more groups of end-products when it is in automatic mode, after creating a program. Up to 6 automatic orders can be programmed for each day of the week.
Page 10
Make sure that the Telis 6 Chronis RTS is in automatic mode (if it is in manual mode, briefly press the selection button ( ) to switch to automatic mode).
Telis 6 Chronis RTS 6. Installation Check the radio transmission range before installing the Telis 6 Chronis RTS mount. The radio range is 20 m through 2 concrete walls. Select a location for the wall mount Mark the screw locations (vertical spacing: 40 mm)
RTS sun sensors into account. The Sun function is only active in automatic mode. As soon as the Telis 6 Chronis RTS switches to manual mode, this function is automatically deactivated. It can only be activated at the next automatic order.
To activate the function: Make sure that the Telis 6 Chronis RTS is in automatic mode (if it is in manual mode, briefly press the selection button ( ) to switch to automatic mode). 2) Press both arrow buttons ( and ) simultaneously: the ( ) symbol appears on the screen: the "Simulated...
Need help?
Do you have a question about the Telis 6 Chronis RTS and is the answer not in the manual?
Questions and answers