SOMFY TELIS 4 SOLIRIS RTS Instructions

SOMFY INSTRUCTIONS
TELIS 4 SOLIRIS RTS
REMOTE CONTROLS
Part #'s
1810648 Telis 4 Soliris RTS Patio
PROGRAMMING - ADDING A NEW REMOTE
1. With your current remote, select
the shade to operate by pressing
the Channel Selector Button. The
LED lights will illuminate each time
the Channel Selector Button is pressed
to show what channel is being
operated.
3. Get the new remote and select
the new channel.
PROGRAMMING - SETTING FAVORITE POSITION
1. Select the shade to operate by
pressing the Channel Selector Button.
The LED lights will illuminate each
time the Channel Selector Button is
pressed to show what channel is
being operated.
3. Press and hold the center (
button until the window shade
jogs up and then down to record
the position.
© Copyright Somfy Systems, Inc. 1/2010
my
5
LED Lights
1 2 3 4
Channel
Selector
my
5
1 2 3 4
my
5
LED Lights
1 2 3 4
Channel
Selector
)
my
5
1 2 3 4
my
Sun
Wind
& Wind
5
Only
1 2 3 4
Sun/Wind
Selector
Four Channel
Telis
2. Using a paper clip, pen or similar device,
press and hold the Programming Button on
the back of the remote until your window
shade jogs up and down.
4. Using a paper clip, pen or similar device,
press and hold the Programming Button
on the back. The window shade will jog.
This remote will now operate your shade
or awning.
2. Using the up (
buttons, bring the shade or awning
to your favorite position, for example
halfway down or out. Press the
center ( ) button to stop movement
my
at the desired location.
4. To reach your favorite position,
press the center (
whenever the shade is already
stopped. The shade or awning
will automatically go to that
position.
C - 0019
Pen
Programming
Button
BACK
) or down ( )
) button
my
Pen
Programming
Button
BACK
Pen
Programming
Button
BACK
5
1 2 3 4
5
1 2 3 4
PAGE 1 REV5