Checking The Electric Power Measured By The Outdoor Units - Mitsubishi Electric AG-150A Instruction Book

3-3 Checking the electric power measured by the outdoor units

The amount of electric power measured by the outdoor units can be checked on the [Measurement List]
screen that can be accessed via a Web browser for system maintenance engineers.
3-3-1 Logging in on the Web browser for system maintenance engineers
Enter the web page address in the address field of the web browser
as follows and press the [Enter] key on the keyboard. A screen
appears for login.
http://[IP address of the AG-150A]/administrator.html
Note: For example, type "http://192.168.1.1/administrator.html" if the AG-150A
IP address is [192.168.1.1].
Note: To encrypt data, change [http] to [https].
3-3-2 Using a measurement list
Click [Monitor/Operation] in the menu, and click [Measurement List] in the sub menu to display a list of the
measurement condition.
On this screen, the amount of electric power measured by the outdoor units can be checked.
Note: Only the measurement results of those units whose "Outdoor unit measurement function" setting was set to [Available] can
be obtained.
Note: If an AI controller (PAC-YG63MCA) or a PI controller (PAC-YG60MCA) is connected, temperature, humidity, and the
reading of the watt-hour meter will also appear.
Update to most recent
condition
Click to update the screen so
that the most recent operation
condition is shown.
Measurement value
The measurement value is
displayed here.
Item
Trend graph
Update to most recent
condition
Measurement value
Switches to the screen where the measurement value can be checked by graph.
Click [Update] to ensure the displayed items reflect the most recent operation condition.
When [Auto] is selected, information is updated automatically every minute to reflect the latest
information.
Displays the current readings of the Electric Energy (kWh), Electric Power (kW), and Efficiency.
Note: Electric Energy (kWh) is the cumulative values since measurement began.
Note: The value for Efficiency will read "0" when the compressor on the outdoor unit is not operating.
Note: The measurement data are collected from outdoor units at 1-minute intervals. So the displayed
data are refreshed at 1-minute intervals.
Description
12
Trend graph
Click to display the trend
graph for each measurement
value.