Dehumidifying - Mitsubishi Electric MJ-E152AK-H Instruction Manual

Dehumidifying

There are 5 operation modes to choose from: HIGH, LOW, MILDEW GUARD, EASY and AUTO.
(HIGH, LOW, EASY ...
AUTO
2
1
Press
2
Press
level.
z The selected AUTO
mode is highlighted.
z Display
and current
humidity setting.
z When displaying
press
is pressed, the humidity setting
changes.
z After 3 seconds, the display
returns to the current humidity
display.
Pressing MODE switch can switch to AUTO
Information
mode.
<To stop operation>
Press
14
15
, MILDEW GUARD ...
It is recommended for setting the humidity level of dehumidification.
1
Blip
12
.
to set the humidity
Blip
. Each time the switch
Blip
12
.
16
)
z AUTO
In order to maintain the humidity level, the unit
operates intermittently after automatic switching of
air flow rate.
z When the current humidity is lower than the set
value, the unit will stop (both the blower/louvre
will stop). It will restart if the humidity level is
higher than the set value.
z For 6 minutes after the power is on, the unit
will begin operating regardless of the room
humidity.
Sometimes it would take a long time to bring down
the humidity depending on opening and closing
frequency of the room door or the size or shape of
,
the room.
<To confirm the humidity setting>
Press
z After displaying
, the current
humidity setting is displayed.
After 3
seconds
After approximately 3 seconds,
the display returns to the
current humidity display.