Mitsubishi Electric MJ-E152AK-H Instruction Manual page 21

3
1
Switch the power OFF.
2
Set the time you wish the unit to turn ON.
Blip
z Press once, the POWER lamp lights,
operating mode indicator and " " on the
digital display flash, and "
z Each press will change the display in
the sequence of 1 to 9 hours.
(Holding the switch will cause the display to
change continuously.)
Blip Blip
No display
(continuous
operation)
3
Select operation mode.
Select the desired operation mode.
Set the DRYING INSIDE (auto) operation as
desired. 19
4
Change the louvre swing direction.
Select the desired louvre swing direction.
5
Confirm the time setting by
pressing the POWER switch.
Blip
z The POWER lamp and timer display light.
J The ON TIMER is set.
If both the timer display and operating mode indicator
blink, it means the POWER switch is not pressed.
(An alarm "blip blip" sounds for 1 minute.)
1 . 5
4 2
12
Press
" is displayed.
. .. .. .
Blip
12–17
18
Press
The ON TIMER can be set between 1 to 9 hours.
Set the timer when the POWER is off.
Example of setting ON TIMER to 5 hours with
AUTO mode (setting: 60%), louvre swing setting
"Wide"
z The remaining time will
decrease one hour after each
hour elapses.
z When the set time is reached,
the unit automatically starts.
Cancellation
Press POWER switch J OFF
Blip
z When the ON TIMER is set during the DRYING
INSIDE operation, the operation is stopped.
z The ON TIMER function is not operable using a
commercially-available timer plug.
Press
z The ON TIMER is
cancelled.
21