Option 2: Entering The Ip Address Directly - ABB 83342-500 Operating Instructions Manual

Operating Instructions
ABB-Welcome
4.2.2

Option 2: Entering the IP address directly

Preconditions:
– There is a DHCP server on the network, e.g. integrated in the router.
– The IP gateway is connected to the router by a LAN cable.
– The PC is connected to to the router by a LAN cable
– The IP gateway is connected and ready for operation.
1. Link the external device in a common network to the IP gateway.
2. Launch the control panel.
3. Get the DHCP server address according to the following steps.
For example: the DHCP server address is 192.168.1.1.
Fig. 3: Get DHCP ser ver address
4. Open the user interface of your router.
Enter the DHCP server address directly into the address line of your browser. Here you will see a list of all
connected devices including their names and IP addresses. Copy the IP address of the device "IP gateway".
Operating Instructions |V1.0
3
6
4
2
Integrating mobile end devices
with ABB-Welcome IP-Gateway
1
5
7
— 11 —