Fuji Xerox ApeosPort-V C5575 Administrator's Manual page 622

15 Problem Solving
4
After you take out the staple cartridge, check
inside of the finisher for any remaining staples.
5
Pull up the metal part of the staple cartridge as
shown in the illustration.
6
Remove the jammed staples (1), and then
return the metal part pulled up in step 5 to the
original position (2).
Be careful in removing jammed staples.
7
Push the staple cartridge into the machine until
it clicks into place.
8
Close the finisher front door.
Note
15
622
CAUTION
• If the finisher front door is not completely closed, a message will appear and the machine remains
paused.