Introduction - Panasonic EBL512 G3 User Manual

Panasonic Eco Solutions Nordic AB
MEW01603 Rev: -
1

Introduction

This document is intended to be used for the daily duties like
disablements / re-enablements, zone tests, etc. in the EBL512 G3
system.
Due to continual development and improvement different S/W
versions can be found. This document is valid for EBL512 G3 S/W
version 2.0.x. (x=0 at the "Date of issue" or "Date of revision".)
The document describes the main menus (incl. the sub menus) valid
for access level / type "Building officer".
This document is less detailed and shorter than the Operating
Instruction, MEW01552.
NOTE! In the left margin are pictures of the buttons / soft keys used
in the menu respectively. Each picture is only shown one time in each
menu – not each time the button / soft key should be used.
A User name and a Password is required to Log on to the control
unit, i.e. for access to the menu system.
The PC program EBLWin is used for commissioning, etc. User
names and Passwords can be added and edited via this program.
EBLWin require an EBLWin key (hardware) to log on to the control
unit in order to download Site Specific Data, e.g. User names and
Passwords.
1
The menus available are depending on the access level / type for the user
respectively, see chapter "Log on to the Control Unit (c.i.e.)", page 4.
EBL512 G3 version 2.0.x, Daily user's manual
1
2