Open Doors (U3); Sensor Values (U4) - Panasonic EBL512 G3 User Manual

Panasonic Eco Solutions Nordic AB
MEW01603 Rev: -
7.3
Print
Escape
menu
7.4
Print
Escape
menu

Open doors (U3)

If any door in the system is open, the open door symbol
up to the right in the display's symbol area.

Cont. from , page 15.
U1 Disablement

Press (  ) two times.
U3 Open doors

Press ( ).
The list is dynamic, i.e. you can scroll in the list with (  ) or (  ).
If a printer is available the Soft key "Print" is shown and can be used
to start a print-out.
➒ To leave a menu press ESC.
To leave the menu system press the Soft key "Escape menu".

Sensor values (U4)


Cont. from , page 15.
U1 Disablement

Press (  ) three times.
U4 Sensor values

Press ( ).
Use the keypad to enter the technical number and/or press ( ).

This is a list, i.e. you can scroll in the list with (  ) or (  ).
Depending on if it is a heat, smoke or multi detector the information
looks different.
If a printer is available the Soft key "Print" is shown and can be used
to start a print-out.
❿ To leave a menu press ESC.
To leave the menu system press the Soft key "Escape menu".
NOTE! The Performance factor and the Min. and Max values are
updated at midnight, i.e. the values are from the previous day.
If the week average sensor value ("Weekly") is 00.0%/m, leave menu
U4 and open it again after approx. 2 minutes.
EBL512 G3 version 2.0.x, Daily user's manual
17
is shown