Firmware Upgrade - Sena 10s User Manual

10S
Type Function
Press the Front Button for 5 seconds
Intercom pairing
Tap the Front Button of any one of the two headsets
Start/End each
Tap the Front Button
intercom
Intercom
End all intercoms Press the Front Button for 1 second
Start Group
Press the Front Button for 3 seconds
intercom
End Group
Press the Front Button for 1 second
intercom
Play/Pause
Press the Joystick for 1 second
Bluetooth music
Music
Track forward/back Move the Joystick left or right for 1 second
FM radio on/off Press the Rear Button for 1 second
Select preset Tap the Rear Button
Seek stations Move the Joystick left or right for 1 second
FM radio
Scan up FM band Double tap the Rear Button
Stop scanning Double tap the Rear Button
Save preset while
Tap the Rear Button
scanning
Handlebar Remote Button Operation Table
46
Handlebar Remote LED
Red flashing
-
-
Green
flashing
-
-
-
-
-
-
-
-
-

16 FIRMWARE UPGRADE

The 10S supports firmware upgrades. You can update the firmware
using the Sena Device Manager (please refer to section 4.7.1, "Sena
Device Manager" ). Please visit Sena Bluetooth website at www.sena.
com to check the latest software downloads.