Enabling/Disabling Voice Activated Intercom; Enabling/Disabling Hd Intercom - Sena 10s User Manual

14.4 Enabling/Disabling Voice Activated Intercom

Voice Prompt
Factory Default
Enable
Disable
If this feature is enabled, you can initiate an intercom conversation
with the last connected intercom friend by voice. When you want to
start intercom, say a word such as "Hello" loudly or blow air into the
microphone. If you start an intercom conversation by voice, the
intercom terminates automatically when you and your intercom friend
remain silent for 20 seconds. However, if you manually start an
intercom conversation by tapping the Phone Button, you have to
terminate the intercom conversation manually.
However, if you start intercom by voice and end it manually by tapping
the Phone Button, you will not be able to start intercom by voice
temporarily. In this case, you have to tap the Phone Button to restart
the intercom. This is to prevent repeated unintentional intercom
connections by strong wind noise. After rebooting the 10S, you can
start intercom by voice again.
.
"VOX intercom"
Disable
Tap the Phone Button
Tap the Jog Dial

14.5 Enabling/Disabling HD Intercom

Voice Prompt
Factory Default
Enable
Disable
HD Intercom enhances the two-way intercom audio from normal
quality to HD quality. HD Intercom will become temporarily disabled
when you enter into a multi-way intercom. If this feature is disabled,
the two-way intercom audio will change to normal quality.
10S
"HD intercom"
Enable
Tap the Phone Button
Tap the Jog Dial
41