Remote Control; Firmware Upgrade - Sena Schuberth SC1 User Manual

15 REMOTE CONTROL

You can remotely control the SC1 via Bluetooth using the
Remote Control (sold separately). This eliminates the need to
take off your hand for button operations. Your SC1 and the
Remote Control must be paired together before use.
1. Turn on the SC1 and the Remote Control.
2. Press the (+) Button or the (-) Button for 10 seconds to enter the
configuration menu. Tap the (+) Button until you hear a voice
prompt saying, "Remote control pairing". Press the (-) Button to
enter into Remote Control Pairing mode and the red LED will
flash rapidly and you will hear multiple beeps. Please refer to
section 14.15, "Remote Control Pairing" for more details.
3. Enter Bluetooth pairing mode on your Remote Control. The SC1
will automatically perform pairing with the Remote Control in
pairing mode. You will hear a voice prompt, "Remote control
connected", when they are successfully connected.

16 FIRMWARE UPGRADE

The SC1 supports firmware upgrades. You can update the firmware
using the Sena Device Manager (please refer to section 4.6.1, "Sena
Device Manager"). Please visit Sena Bluetooth website at oemsena.
com/oem-schuberth/ to check the latest software downloads.
SC1
39