Universal Intercom Pairing; Two-Way Universal Intercom - Sena 10s User Manual

10S
3. If non-Sena headset (already paired as Universal Intercom with
Sena) is turned on, then the multipoint connection is automatically
deactivated. And the non-Sena headset is automatically
connected to Sena headset as a Universal Intercom. So you
cannot use multipoint connection device such as GPS, while a
non-Sena headset is turned on.
4. Even though you disconnect the non-Sena headset as a Universal
Intercom, it will not automatically restore the multipoint connection.
To restore the multipoint connection, you should turn off the
non-Sena headset first, then try to connect to multipoint device
manually from the device screen or simply reboot the device so
that it automatically connects to the Sena headset.

11.1 Universal Intercom Pairing

The 10S can be paired with non-Sena Bluetooth headsets for Bluetooth
intercom conversation. You can pair the 10S with only one non-Sena
Bluetooth headset so if you pair with a different non-Sena Bluetooth
headset, the previous pairing will be removed.
1. Turn on the 10S and a non-Sena Bluetooth headset that you want
to pair with.
32
2. Press the Jog Dial for 12 seconds to enter the configuration menu.
Rotate the Jog Dial until you hear a voice prompt, "Universal
intercom pairing". Tap the Phone Button to enter into Universal
Intercom Pairing mode and the blue LED will flash rapidly and you
will hear multiple beeps. Please refer to section 14.12, "Universal
Intercom Pairing" for more details.
3. Perform the operation required for handsfree pairing on the non-
Sena Bluetooth headset (refer to the User's Guide for the headsets
you want to use). The 10S will automatically pair with a non-Sena
Bluetooth headset when each are in pairing mode.

11.2 Two-way Universal Intercom

You can initiate the Universal Intercom connection with non-Sena
Bluetooth headsets using the same intercom connection method as
you would between other Sena headsets. You may single tap the Jog
Dial to begin an intercom conversation with the first intercom friend,
double tap with the second intercom friend, and triple tap with the
third intercom friend.
Non-Sena Bluetooth headsets may initiate the Universal Intercom
connection, by activating the voice dialer or using the redialing
operation. You may also disconnect the existing connection by using
the operation to end a call (refer to the User's Guide of the headsets
for voice dialer, redialing, and ending a call).