Installation (Continued)
1.Screw the power cable to the terminal block.
Proper torque is 11 lbf·in(1.2N·m)
Terminal
block
Screw
5
2.Check that the power cable is securely fi xed
to the terminal block.
3.Screw the green striped bonding wire to the
terminal base.
Proper torque is 11 lbf·in(1.2N·m)
1.Run the power cable through the rubber
bushing, and attach the rubber bushing to
the terminal cover.
2.Attach the terminal cover to the main unit
using the terminal cover mounting screw.
6
3.Move the power cable to the left side of the
terminal cover.
4.Check that the power cable and wires are
not pinched anywhere.
Power cable
Green striped bonding wire
Power
cable
Terminal
block
Power cable
Green striped
bonding wire
screw
Green striped
bonding wire
Power cable
Terminal cover
mounting screw
Rubber
bushing
− 9 −
Terminal base
Green striped
bonding wire
screw
Terminal
block
Terminal cover