Optical Base Assy Disassembly - Sanyo PDG-DET100L Service Manual

Mechanical Disassembly

6-1 Optical base assy disassembly

1 Remove 3 screws-A (M3x6) and take the Optical base rod top off.
top view
Mount the
prisms rods
as shown in
the figure. No
gap between
the rod and
the optical
base rod top.
A
A
Prism (Rod)-S
(M3x6)x4
Prism (Rod)-L
Mirror tunnel
Prism (Rod)-S
Note: As the optical components (Mirror tunnel, Prism
Rod) are very sensitive, never touch or wipe the glass
or mirror surface. If there are some dust particles on the
surface, use the air spray to remove them.
-6-
A
Optical base rod top
(M3x1)x
(M3x1)x
Color wheel socket
Guide
Optical base rod bottom
(M3x6)x4
Optical base rod duct
Color wheel socket
Guide
Prism (Rod)-L