Trademark And License Information - Mitsubishi Electric C10 SERIES Owner's Manual

Appendix B: Troubleshooting, continued
Sound
Symptom
1. There is no sound even when
the volume is turned up.
2. The sound does not match the
screen picture.
3. The sound from my A/V
receiver does not match the
screen picture (I should hear
the correct audio from my A/V
receiver).

Trademark and License Information

LICENSOR'S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD PARTY, ANY
EXPRESS, IMPLIED OR STATUTORY WARRANTY OR REPRESENTATION ON BEHALF OF SUCH SUPPLIERS,
INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, TITLE, MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE.
®
Digital Light Processing
Manufactured under license from Dolby Laboratories. Dolby is a trademark of Dolby Laboratories.
®
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. ENERGY STAR is a registered mark owned
by the U.S. government.
HDMI ® , the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
The software in this TV is based in part on the work of the Independent JPEG Group, copyright © 1991-1998, Thomas
G. Lane, all rights reserved.
Remarks
• Check if the MUTE key is on.
• The TV's Sound > Analog Listen To setting may be set to SAP (analog
program from the ANT input) but no SAP is being broadcast.
• The TV's Sound > Language setting for a digital program may be set to an
unavailable language.
• Check that the Sound > TV Speaker option is set to ON to hear sound from
the TV speakers.
• If using an A/V receiver, check that the Sound > TV Speaker option is set to
OFF to hear sound from the A/V receiver speakers.
• Press and hold the POWER button on the control panel for 10 seconds to
perform System Reset.
The TV's Sound > Analog Listen To setting may be set to SAP (analog
program from the antenna input).
Check that DIGITAL AUDIO OUTPUT on TV's main panel is connected to the
A/V receiver.
Without this connection, devices connected only to the TV (and not the A/V
receiver) can be heard only from the TV speakers. Note that this includes the
ANT input and any device sending audio to the TV only.
®
and DLP are registered trademarks of Texas Instruments.
Appendices
For assistance call 1(800) 332-2119
33