Mitsubishi Electric C10 SERIES Owner's Manual page 22

22
3. TV Menus
Setup, continued
Screen Saver
When on, displays a randomly moving Mitsubishi logo
after one minute without activity or a video signal. The
logo reminds you that the TV is still on. Press ENTER to
choose either On or Off.
Timer
The Timer tells the TV to power on automatically at a
time you set. Use this menu to set a day, time, input, and
channel for the Timer. If the TV is already on at the set
time, the TV will automatically change to the designated
channel or input.
• The TV clock must be set before you can use the
Timer feature.
• As a reminder that the TV Timer is set, the STATUS
indicator blinks slowly while the TV is powered off.
1.
Highlight the item you want to change and press
ENTER to display a list of settings.
2.
Press to make a selection.
3.
Press ENTER to return to the menu.
4.
Highlight Done and press ENTER.
Menu Language
Highlight either English or Spanish and press ENTER to
confirm your selection.
For assistance call 1(800) 332-2119
Cl ock
Set the clock if you want to
• Use the TV's auto-on timer.)
• Display current time in the on-screen status.
If Daylight Saving Time is observed in your area, check
or uncheck the box when the time change occurs.
1.
In the Setup > Clock menu, highlight the item you
want to change.
2.
Press ENTER for adjustment mode.
3.
Highlight the correct setting in the list. For the time
and date, use to change and
You can also enter digits for the time.
4.
Press ENTER to confirm your entry and return to the
Clock menu.
5.
Highlight Done and press ENTER.
3D Mode
See page 13 for use of this menu.
RESET ALL
Sets all user-defined settings to the factory defaults
and runs the initial guided setup. To prevent accidental
use of RESET ALL, set a pass code (PIN) in the Locks
menu. See page 24 .
to move.