Installing The Speakers; Removing The System Board - Dell latitude e5270 Owner's Manual

Installing the speakers

1. Place the speakers into the slots on the computer.
2. Place the LED board.
3. Tighten the screws to secure the LED board to the computer.
4. Route the speaker cable through the retention clips through the routing channel.
5. Connect the speaker cable to the connector on the system board.
6. Install the:
a. dock frame
b. WLAN
c. WWAN
d. hard drive assembly
e. battery
f. base cover
7. Follow the procedure in

Removing the system board

1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
c. memory
d. hard drive assembly
e. keyboard
f. dock frame
g. WLAN
h. WWAN
i. heat sink assembly
j. power connector port
3. To remove the system board:
a. Lift the latch and disconnect the touch pad and system board cable from the computer [1, 2].
b. Disconnect the speaker cable and eDP cable from the system board [3].
28
or M.2 SSD or PCIe SSD
After working inside your
Before working inside your
or M.2 SSD or PCIe SSD
computer.
computer.