Important Safety Instructions For All Battery Packs - DeWalt DCL508 Original Instructions Manual

EN G LI S H
The tool will automatically turn off if the Electronic Protection System
engages. If this occurs, place the Li-Ion battery on the charger until it is
fully charged.
LI-ION BATTERY PACKS ONLY
Li-Ion batteries are designed with an Electronic Protection System
that will protect the battery against overloading, overheating or deep
discharge.
The tool will automatically turn off if the Electronic Protection System
engages. If this occurs, place the Li-Ion battery on the charger until it is
fully charged.
Important Safety Instructions for All Battery
Packs
When ordering replacement battery packs, be sure to include catalog
number and voltage.
The battery pack is not fully charged out of the carton. Before using
the battery pack and charger, read the safety instructions below. Then
follow charging procedures outlined.
READ ALL INSTRUCTIONS
• Do not charge or use battery in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust.
Inserting or removing the battery from the charger may ignite the
dust or fumes.
• Never force battery pack into charger. Do not modify battery
pack in any way to fit into a non-compatible charger as
battery pack may rupture causing serious personal injury.
• Charge the battery packs only in D
• DO NOT splash or immerse in water or other liquids.
• Do not store or use the tool and battery pack in locations
where the temperature may reach or exceed 40 °C (105 °F)
(such as outside sheds or metal buildings in summer).
52
WALT chargers.
E