Installing The Necessary Software - Canon VB-S30D Operating Manual

Installing the Necessary Software

Install the following software to perform initial settings for the camera.
• Camera Management Tool: Software required for performing initial camera settings and maintenance
• Admin Tools Certificate: An electronic certificate that is required for using Admin Viewer and Admin Tools
• .NET Framework 3.5 SP1/.NET Framework 4.5: The execution environment required for network camera software (not
required if already installed on the computer)
You can perform either an Easy Installation or a Custom Installation of the software.
Note
• All computer users will be able to use Admin Viewer and Admin Tools if the Admin Tools certificate was installed by the installer.
• Select [Custom Installation] and install only the "Admin Tools Certificate" if you intend to use the Admin Viewer and Admin Tools on a
computer other than the one where the Camera Management Tool is installed.
Insert the Setup CD-ROM included in the camera in
1
the disc drive on the computer.
After confirming that all other applications have been
2
closed, click the [Start] menu > [My Computer].
3 Double-click the CD-ROM icon > [Applications] folder
> [VBToolsInstall.exe].
The installation screen appears.
Note
If the [User Account Control] screen appears, click [Yes] or
[Continue].
4 Select the installation method.
[Easy Installation]: Camera Management Tool and
Admin Tools certificate are installed.
26
[Custom Installation]: The user can select and install
desired software.
After selecting [Easy Installation], click [Next] and after
5
selecting [Custom Installation], select the checkboxes
of the software you want to install and click [Next].
The User License Agreement screen appears.
Read through the user license agreement and click
6
[Yes] if you accept it.
Installation starts.
When the installation complete screen appears, click
7
[Exit] or [Reboot].