Advertisement
Ý
Dirt and/or calcium residue may block the nozzles
on the spray arms. For this reason, regularly check
the spray nozzles.
1. Lower spray arm
2. Upper spray arm
1. Remove the lower rack from the machine.
2. Pull off the lower spray arm in an upward direction
A.
3. Loosen the fastening screw of the upper spray
arm and pull off the spray arm B by a downward
motion.
4. Clean the spray arms under running water.
5. Replace the lower spray arm in an downward
direction.
6. Replace the upper spray arm and tighten the
fastening screw by turning it left around.
7. Insert the lower rack.
A
1
2
CAUTION
B
Is the machine plugged in?
=
Are all fuses operative?
=
Is the water supply fully turned on?
=
Is the dishwasher door closed securely?
=
Have you pressed the On/Off button?
=
Cancel the program by pressing the Start/Pause
=
button for 5 seconds. See section 6. or Quick
Reference Guide.
Adjust door tentioners (wooden door models
=
only, see Installation Manual)
Follow the instructions below:
=
“Follow the instructions given in the Following
pages”
18
Advertisement
