Table of Contents
Advertisement
: '11/Jul/25
1
G. Check of the connected position of main unit
and finisher
1)
Insert the rail of the finisher into the slit on the rail reception
sheet metal of the main unit, install the finisher.
2)
Remove the screw, and remove the connector cover on rear
side of the finisher.
3)
Check that the center of the screw hole of the finisher is in the
range of specification of an oval hole of the connection fixture
that exist on main body rear side.
* When not the range of specification, execute the following
adjustment. If the adjustment is not required, Progress to the
procedure of "I. Connection of the saddle stitch finisher".
1
MX-5111N MX-FN18 (SADDLE STITCH FINISHER) 15 – 6
H. Adjustment
1)
Remove the finisher from the main unit.
2)
Open the front door.
3)
Remove the cabinet fixing screw.
Hide quick links:
Advertisement
Table of Contents
