Sharp MX-4110N Installation Manual page 89

6) Remove the screws, and remove the paper pass latch recep-
tion parts and the positioning pin.
C. Attaching the mylar
1) Attach the mylar (Packed items) to the position indicated in the
figure.
Corner reference
Corner
reference
D. Attach the interface left cabinet
1) Insert the rib of the interface left cabinet into the slit on the
lower surface of the scanner left cabinet. Install the interface
left cabinet with the screw of the paper exit tray which was
removed in procedure 4).
Reference
Reference
MX-5111N MX-FN18 (SADDLE STITCH FINISHER) 15 – 5
E. Installation of the connection fixture F/R
1) Install the connection fixture R (Packed items (No.8)) to the
main unit with the fixing screws (Packed items (No.3)).
2) Install the connection fixture F (Packed items (No.7)) to the
main unit with the fixing screws (Packed items (No.3)).
F. Attaching the cushion
1) Attach the cushion (S) (Packed items), the cushion (M)
(Packed items) and the cushion (L) (Packed items) to the posi-
tion indicated in the figure.
Cushion (M)
Reference
Refer-
ence
Cushion (L)
Cushion (S)
Reference
Refer-
ence
Reference
Refer-
ence