Panasonic KX-TDA50 Feature Manual page 40

3.1.3 Call Log, Incoming
If the caller's name is logged, the caller's phone number is not displayed.
•
If the answering destination is not the original extension (e.g., Call Pickup or FWD—No Answer), the call
is logged in the Incoming Call Logs of both the original and the answering destination. If a call is forwarded
to multiple extensions before being answered, the call is logged in the call logs of all the extensions it was
forwarded to. If a call is forwarded to an ICD group and is not answered, the call is not logged in the call
log for the ICD group.
•
Incoming Call Log for Calls to a PS
Each portable station (PS) also has an Incoming Call Log. When a call is directed to a PS, the call will be
logged in the call log of the PS even when:
a.
The PS is out of range.
b.
The PS is turned off.
c.
The Cell Station (CS) is busy.
•
Display Lock
The Incoming Call Log of an extension can be locked through personal programming (Directory and Call
Log Lock) to prevent other users from viewing its contents. In this case, the Outgoing Call Log display, the
Personal Speed Dialing number display and the SVM Log display are also locked, and the voice messages
in the user's message box cannot be played back.
An extension personal identification number (PIN) is required to use this feature. (® 5.1.6 Extension PIN
(Personal Identification Number))
•
Incoming Call Log Memory
The total number of incoming calls that can be logged by the PBX is limited. The maximum number of calls
that can be logged in the Incoming Call Log of each extension and ICD group can be specified through
system programming. When a call log is full, the oldest call will be replaced each time a call is received.
•
Automatic Caller ID Number Modification
If the PBX is programmed to automatically modify incoming telephone numbers, the modified numbers will
be logged in the Incoming Call Log.
•
Incoming Call Log for Calls to an ICD Group
If a call directed to an ICD group is not answered, the call is logged in the Incoming Call Log of the ICD
group. If the call is answered, it is logged in the call log of the answering extension only.
Through system programming, it is possible to select which Incoming Call Logs record call information
when a member of an ICD group answers a call to the group:
–
Only the Incoming Call Log of the extension that answered the call.
–
Both the Incoming Call Log of the extension that answered the call and that of the ICD group.
PC Programming Manual References
5.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD—
Log Memory
5.15 [3-5-3] Incoming Call Distribution Group—Miscellaneous—
Answered Call
6.1 [4-1-1] Wired Extension—Extension Settings
→Option 5— Incoming Call Display
→Option 6— Display Lock / SVM Lock
→Option 7— Incoming Call Log Memory
6.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Ext. No. / Floating Ext. No. (for Call Log)
6.10 [4-2-1] Portable Station—Extension Settings
→Option 5— Incoming Call Display
→Option 7— Incoming Call Log Memory
6.18 [4-3] DSS Console
→ Type
→ Ext. No. / Floating Ext. No. (for Call Log)
40 Feature Manual
Options—Call Log to ICD Group for
Document Version 2010-11
Incoming Call