Quick Setup - Panasonic KX-TDA50 Feature Manual

Operating Manual References
1.3.58 Quick Dialing

14.1.2 Quick Setup

Description
Basic PBX parameters can be programmed the first time the PBX is accessed with a PC using the Maintenance
Console software.
When the PBX is accessed with the Installer Level Programmer Code and default password (®
13.1.3 Password Security), for the first time (i.e., accessed after the PBX's settings have been initialized or
when the PBX's settings are still set to their default values), Quick Setup will launch automatically. From here
the following basic parameters can be programmed as desired:
Item
Date & Time Set
System Password
for Installer
Operator & Manager
Flexible Numbering
Type
Extension Number
Operator
Local Access
Remote
Maintenance
Number
Note that the programmable items may vary depending on the version of Maintenance Console being used.
Document Version 2010-11
Parameter
Year/Month/Date/
Hour/Minute
4–10 characters
Extension Number
1.
Pattern 1
(with )
2.
Pattern 2
(without )
From 101/from 201
(for KX-TDA50/
KX-TDA100/
KX-TDA200) or from
1001/from 2001 (for
KX-TDA600)
0/9
0/1/9
Remote Maintenance
Dial Number
Description
The date and time set on the PC can be used by default.
Enter the system password for installer (®
13.1.3 Password Security).
Assign a PBX operator. (® 12.1.5 Operator Features)
This extension will be the operator for all time modes, and
is automatically assigned manager status to perform
manager operations. (® 11.1.1 Manager Features)
Select whether or not the prefix " " must be entered
before dialing feature numbers.
[Example] Call Pickup feature number
Pattern 1 (with ): 41
Pattern 2 (without ): 41
Note that certain feature numbers (Line Access numbers,
Operator Call, etc.) never need this prefix.
For a list of the default flexible numbers, refer to the
[Flexible Numbering Table (available while a dial tone is
heard)] (® 6.1.4 Flexible Numbering/Fixed Numbering).
Determines the number from which default extension
numbers begin.
The feature number for Operator Call can be selected.
The feature number for Idle Line Access can be selected.
Enter the complete telephone number of the PBX
(including the country code). When necessary, this
number will be used to access the PBX from a remote
location for maintenance purposes.
14.1.2 Quick Setup
Feature Manual 277