Pc Adj - Sanyo LCD-32CA8Z Owner's Manual

MENU OPERATION
"PC Adj." doesn't work expect for PC mode.
"PC Adj." doesn't work if no signal is input in PC mode.
1
Press MENU button and the main menu will appear.
Press CHANNEL UP/ DOWN (
2
Press VOLUME(+/-) buttons to enter into PC Adj. (Whenever
this menu is accessed initially, Auto Adjust will be the default
selection.)
3
desired.
4
Press VOLUME(+/-) buttons to adjust value.
Press BACK button to return to the previous menu.
Press MENU button or wait for 5~60 seconds (refer to "Duration" on
page 33) to exit menu operation.
Auto Adjust
Press VOLUME(+/-) buttons , and the TV automatically detects
incoming signal, and adjust itself to optimize its performance. If the
image is not displayed properly, a manual adjustment is required
(Refer to following adjustments).
H-Position
The horizontal picture position will be moved to the left side by
pressing VOLUME(-) button. And it will be moved to the right side by
pressing VOLUME(+) button.(0~100)
V-Position
The vertical picture position will be moved to the down side by
pressing VOLUME(-) button. And it will be moved to the up side by
pressing VOLUME(+) button. (0~100)
Clock
Eliminate flicker from the image. Press VOLUME(+/-) buttons to adjust
Clock. (0~100)
Phase
Eliminate disorder from the image. Press VOLUME(+/-) buttons to
adjust Phase. (0~100)
Note:
"Tuner" doesn't work in PC mode.
"Colour" , "Tint" and "Sharpness" are not work in PC mode.
34

PC Adj.

) buttons to select PC Adj.
PC Adj. MENU
Picture
Auto Adjust
>>>
H-Position
Sound
V-Position
Clock
Tuner
Phase
Time
Setup
PC Adj.
Adjust
Select Return
BACK
Picture
Auto Adjust >>>
H-Position
Sound
V-Position
Clock
Tuner
Phase
Time
Setup
PC Adj.
Adjust
Return
Select
BACK
50
50
50
50
Exit
MENU
50
50
50
50
Exit
MENU