Pip/Pop Operation - Sanyo LCD-32CA8Z Owner's Manual

Using PIP function, you can enjoy a TV program and an image such as HDMI input from a side terminal at the same time.
Only the sound on the main picture is heard from the TV speaker or the headphone jack. The sound on the sub-picture can-
not be heard.
PIP ON/OFF button
1
Press PIP ON/OFF button to display sub picture. If initialization picture is HDMI input, sub picture will be defaulted
with TV input. If initialization picture is not HDMI input, sub picture always be HDMI input.
2
During PIP mode, pressing the MAIN/SUB button will switch main and sub picture.
The sound on the main picture and the sub-picture also changes at the same time.
3
Each time CHANGE button is pressed, the location of sub picture is changed as follows.
4
Press PIP ON/OFF button, exit PIP mode.
NOTE:
Combination of the Main-picture and Sub-picture:Only HDMI can assembled with others input source.
POP button
1
Press POP button to display two pictures. The left picture is main picture, the right picture is sub picture.
2
During POP mode, pressing the MAIN/SUB button will switch main or sub picture.
The sound on the main picture or the sub picture also changes at the same time.
3
Each time POP button is pressed, the location of sub picture is changed as follows.
NOTE:
Combination of the Main-pticture and Sub-picture: Only HDMI can assembled with others input source.

PIP/POP OPERATION

PIP ON/OFF
CHANGE button
POP ON/OFF
CHANGE button
BASIC OPERATION
MAIN/SUB button
MAIN/SUB button
23