Problems During Operations - Hitachi BD-S5500 Operating Instructions Manual

Troubleshooting
Symptom
Did you select a program for which you cannot
The 'WASH'
set the <AUTO SELF CLEAN> 'WASH'
indicator of the
operation?
<AUTO SELF
CLEAN> function
Is the indicator for the number of rinse cycles
goes off.
turned off?
The <AUTO
Did you select a program or settings for which
SELF CLEAN>
you cannot set the <AUTO SELF CLEAN>
operations cannot
operations?
be set.
The <AUTO SELF
CLEAN> operation
Is the laundry concentrated on one side?
has been set but
does not occur.
The orange LED
of the <AUTO
SELF CLEAN>
function is lit after
operations.
Symptom
Is the laundry concentrated on one side?
Did you add excessive amount of detergent?
Rinse operations
differ from the
settings.
[EX] is lit, but water
injection does not
occur.
The machine Did the laundry gravitate to one side during the
returns to the rinse final spin?
operation during
the spin operation.
The drum rotation
speed changes
during the spin
operation.
92
(continued)
Possible cause
The machine is on standby for the
<AUTO SELF CLEAN> 'DRY' operation to
start.

Problems during operations

Possible cause
If so, another rinse operation may be added
to correct this. (The remaining time indicator
will increase, but the display for the number of
rinse operations will not.)
If foaming is excessive during the rinse and
spin operations, the setting will be changed to
Water-Injection Rinse to reduce the foam.
If the laundry could not be evenly distributed
during the spin process of a rinse operation,
the setting will change to Water-Injection Rinse
automatically.
When two or more rinse cycles are set, the first
rinse operation will always be Sprinkle Rinse.
(P. 66)
Softener is added during the final rinse. In
order to mix in the softener, Water-Injection
Rinse will automatically change to Normal
Rinse during the final rinse.
If so, the machine will return to the rinse
operation to correct this.
The drum rotation speed adjusts automatically
according to the wash load size and
distribution.
Solution
Select a program for which you can set the
<AUTO SELF CLEAN> 'WASH' operation.
(P. 4)
If no rinse operation is set, the 'WASH' indicator
will not light.
Select a program or settings for which you can set
the <AUTO SELF CLEAN> operations.
This is not a malfunction.
This is not a malfunction.
After opening the door and removing the laundry,
close the door, and press the <START> button.
Solution
Load laundry into the drum carefully to avoid
concentration on one side. (P. 21, 22)
Refer to the detergent indicator to determine the
appropriate amount of detergent.
This is not a malfunction.
This is not a malfunction.
This is not a malfunction.
This is not a malfunction.
This is not a malfunction.
(P. 4)
(P. 28, 29)