GEONAUTE ONrhythm 410 User Manual page 8

It will automatically receive the signal if it is within range of the strap.
In this case, the symbol (heart) at the top left of the screen flashes and the heart rate is
displayed on the main line.
If the signal has not been found, the watch displays "NO SIGNAL".
If the connection is broken for more than five minutes, the display changes
to ---.
To reactivate the signal search, press down MODE for 3 seconds
3 sec
5.2/ Secondary information display
The secondary information on the second line can be changed by pressing down LAP/RESET
5.2.1/ Training stopwatch
This is the standard display when entering CARDIO mode. Press START/STOP
stopwatch. Then press START/STOP
to put it back to 0.
3 sec
NB: 1. The stopwatch can only be started or stopped when it is displayed on the screen.
2. When the user changes mode while the stopwatch is running, a symbol
in all other modes.
3. The stopwatch can measure a duration of time from 0 to 23h 59min 59s.
5.2.2/ Lap information (LAP)
During your workout, you have the option of taking and saving your "lap time" (LAP).
To do this, simply press down the
The watch displays the "lap time" to you for 5 seconds. You will be able to consult these "lap
again to stop it. Hold down LAP/RESET
button when the stopwatch is activated
8/24
to start the
for 3 seconds
is displayed
.
9