Table of Contents
Advertisement
Setting
Server Address/Port
User Name/Password
1.5.3 Setting E-mail notification
You can configure the software to send event detection (Motion Detection, Alarm Detection, Sensor
Detection, Sound Detection, and Shock Detection) notifications and camera connection status information to
PC and mobile phone addresses.
Detected camera images (JPEG) can be sent as E-mail attachments.
1.
Click
on the multi-monitoring window.
2.
Click [E-mail Settings] under [Preferences].
3.
Set the parameters and click [OK].
E-mail Settings Page
Enter the IP address of proxy server and port number.
Enter them after asking your network administrator.
•
Enter the alphanumeric characters. (Enter only numeric characters for
the port number.)
•
Proxy servers are not supported in IPv6 connections.
Enter the IPv4 address or the URL which is registered with the IPv4
domain name service.
Enter the user name and password for the proxy server, if required.
Enter them after asking your network administrator.
•
Enter the alphanumeric characters.
1.5.3 Setting E-mail notification
Description
Operating Instructions
19
Advertisement
Table of Contents
