Table of Contents
Advertisement
5.3 Error Message List
5.3 Error Message List
License Registration
Message
License registration is complete.
The registration information was
incorrect. Check the registration code and
license key and try again.
Enter Registration Code.
Enter License Key.
Preferences
Message
Basic Settings
Set the recording capacity limit in the
range of 1GB to **GB (90% of the drive
capacity).
Limit the recording capacity is set for each
camera. Do you want to disable these
settings and enable the Limit the
recording capacity setting in the
preferences page?
Enter a number in one-byte character in
Recording Capacity Limit.
Enter Recording Capacity Limit.
The specified Destination Folder is
incorrect.
Proxy server
Enter Server Address.
174
Operating Instructions
Cause and Remedy
•
License registration completed normally.
•
The registration information was incorrect.
→
Check the registration code and license key and try
again.
•
Registration Code space was blank.
→
Enter the registration code on the attached registration
code sticker (1 set (3 stickers)).
•
License Key space was blank.
→
Enter the license key on the attached registration code
sticker (1 set (3 stickers)).
Cause and Remedy
•
When the capacity limit of the destination drive exceeds
90% of the drive capacity.
→
Set the recording capacity limit to 1GB or more, or 90%
of the drive capacity.
•
Preference settings and the [Limit the recording capacity] for
each camera cannot be set up at the same time.
→
Set the recording capacity limit for each camera, or for
the destination drive.
•
When the Recording Capacity Limit is not in English
one-byte characters.
→
Enter the recording capacity limit in English one-byte
characters.
•
The Recording Capacity Limit space was blank.
→
Enter the Recording Capacity Limit.
•
The path of the destination folder was more than 128
characters.
→
Select a destination folder with a path less than 128
characters.
•
The destination folder cannot be written to.
→
Change the attributes of the folder so that it can be
written to and read from.
•
When the port has been entered and the address field is
blank.
→
Enter the server address.
Advertisement
Table of Contents
