Scan Defaults; File Format - Fuji Xerox DocuPrint CM215 Series User Manual

• Margin Middle
Purpose:
To specify the value of the middle margin.
Values:
0mm*/0.0 inch*
0-50mm/0.0-2.0 inch

Scan Defaults

Use the Scan Defaults menus to configure a variety of scanner features.
NOTE:
• Asterisk (*) is the factory default setting.
• Scan to Network
Purpose:
To store the scanned image on a network server or on a computer.
Values:
Computer(Network)*
Server(FTP)

• File Format

Purpose:
To specify the file format to save the scanned image.
Values:
PDF*
TIFF
JPEG
• Color
Purpose:
To set the color mode.
Values:
Black & White
Color*
Specify the value in increments of 1 mm/0.1 inch.
(DocuPrint CM215 f/CM215 fw Only)
Stores the scanned image on a computer using the Server Message
Block (SMB) protocol.
Stores the scanned image on a server using the FTP protocol.
Scans in black and white mode. This is available only when File
Format is set to PDF or TIFF.
Scans in color mode.
Using the Operator Panel Menus and Keypad 329