Install The B426 - Bosch ICP-EZM2 System Reference Manual
Easy series control panel
Hide thumbs
Also See for ICP-EZM2:
- Installer's manual (80 pages) ,
- System reference manual (126 pages) ,
- Quick start manual (24 pages)
Table of Contents
Advertisement
30
en | System Installation and Configuration
Figure 3.4: Antenna installation
Callout ᅳ Description
1 ᅳ B44x plug-in cellular communicator antenna (routed through any knock-out)
2 ᅳB44x plug-in cellular communicator antenna cable (connected to the module)
3.2.6
Install the B426
The control panel supports one B426 Conettix Ethernet Communication Module for Ethernet
connectivity.
Setting the bus address:
The B426 Conettix Ethernet Communication Module address switch provides the value for the
module's address. Set the address to 6.
After you set the address switch for the proper address, install the module.
Mount the B426 into the enclosure's 3-hole mounting pattern using the supplied mounting
screws and mounting bracket.
2014.09 | 01 | F.01U.306.221
1
System Reference Guide
Easy Series Control Panel
2
Bosch Security Systems, Inc.
Advertisement
Table of Contents
