Installation Considerations - Bosch ICP-EZM2 System Reference Manual

78 en | Device Specifications and Overview
Microphone
Operating
Temperature
Relative Humidity
Wall and Cover
Tamper Switch
Frequency
Table 8.5: Specifications
8.7.1

Installation considerations

For the best detector performance, select a mounting location that is:
–
–
–
–
–
Avoid mounting the detector in:
–
–
–
–
–
–
–
Avoid locations that expose the detector to possible false-alarm sources such as:
–
–
–
–
–
–
–
2014.09 | 01 | F.01U.306.221
Minimum pane size for all
types of glass
Omni-directional 360ﾟ electret
Functional range: -10°C to +49°C (+14°F to +120°F)
EN 50130-5 Class II only: -10ﾟC to 40ﾟC (+14ﾟF to +104ﾟF)
0% to 93% (non-condensing)
Transmits a tamper signal when someone removes the device from
its base or pulls it away from the wall.
433.42 MHz
Mounted on the ceiling within a maximum range of 20 ft (6 m)
For armor-coated glass installations, mount the sensor no more than 12 ft (3.65 m) from
the glass
Mount the detector in the direct line of sight of the glass to be protected
On an opposite, or adjoining wall, within a range of 20 ft (6 m) for plate, tempered,
laminated, and wired glass
In a suitable environment: temperature between -18 and 50ﾟC (0 and 120ﾟF); and
humidity between 10 and 90% non-condensing
Glass airlocks and glass vestibule areas
Humid rooms
Small utility rooms
Rooms with noisy equipment (white noise) such as air compressors, bells, and power
tools
Rooms smaller than 10 ft x 10 ft (3 m x 3 m)
Rooms with lined, insulating, or sound supressing drapes
A corner of a room
Glass airlocks and vestibule areas;
Kitchens;
Corner mounting;
Residential car garages;
Stairwells
Bathrooms; and
Small acoustically live rooms
System Reference Guide
Easy Series Control Panel
Tempered 3.2 mm to 6.4 mm
(1/8 in to 1/4 in)
Laminated 3.2 mm to 6.4 mm
(1/8 in to 1/4 in)
Wired 6.4 mm (1/4 in)
1.2 m (4 ft)
Bosch Security Systems, Inc.