17 SmarTrunk
17.2 Configuring the Function Port of the SmarTrunk Board
1 Select "Edit > Function Port" in the FPU Menu.
2 Select SmarTrunk for the External Devices to assign functions to each port for operating the SmarTrunk
board.
3 Select "Program > Write to Radio" in the FPU Menu.
4 The configuration data is sent to the transceiver.
5 The SmarTrunk board automatically activates when the transceiver is turned ON.
Note: Select "Edit > SmarTrunk" in the FPU menu to change the SmarTrunk configuration. Write the data to the SmarTrunk board
in the "Program > Write Data to Trunking Board" display.
Note: Read the configuration data of the SmarTrunk in "Program > Read Data from Trunking Board".
60
Select SmarTrunk.
All necessary parameters for the
SmarTrunk are automatically
configured.