Connect Between The Air Conditioning Unit And Ysp10 - Yamaha YSP10 Service Information

12.6. Connect between the air conditioning unit and YSP10

Connect the communication cable and the temperature sensor cable between the air conditioning unit
and YSP10.
Open the rear bottom cover of YSP10.
Remove the rear top cover and then open the rear bottom cover.
Connect the harnesses.
The communication cable and temperature sensor cable are retracted in the cable duct shown below.
Connect the communication cable [AC ALM] to the cable of the air conditioning unit named [AC ALM].
Connect the temperature sensor cable to the connector unit on the rear side of the air conditioning unit.
On YSP10

On the air conditioning unit

Temperature sensor cable
Arrange the harnesses retracted in the cable duct.
Cable duct
SI1906002E-001=YSP10 installation and adjustment procedures
58/120
For Service Engineers
Service Information
Communication cable [AC ALM]
Temperature sensor cable
Communication cable [AC ALM]:
Air conditioning unit side