About The Use Of Hand Lifter And The Gravity Center Of Ysp10 - Yamaha YSP10 Service Information

1.3.3. About the use of hand lifter and the gravity center of YSP10

Caution
Use a hand lifter which has at least 2 tons of lifting force and 1.5 m length of folks.
Use the hand lifter of at least 2tons lifting and 1.5 m forks. Otherwise, the hand lifter may break and/or the machine fall
off from hand lifter upon moving.
The center of gravity of the YSP10 is slightly in front of the center.
So, in principle, YSP10 is lifted by inserting a hand lifter from the front side of its body.
Insert a hand lifter
from the front
However, when YSP10 is moved to lateral direction, insert a hand lifter from sideways and slightly front of the center of
YSP10. Also, do not lift all at once, but lift a little to make sure if it is stable and then lift and transfer YSP10.
[Front]
SI1906002E-000=YSP10 installation and adjustment procedures
11/120
For Service Engineers
Service Information
Insert a hand lifter
slightly front of the
center.