Toshiba e-STUDIO2010AC Imaging Manual page 140

2.Copier-specific Adjustments
Color Sub
[05] Code
mode code
05-7690 -
Full
color
05-7718 -
05-7725 -
05-7795 -
05-7816 -
© 2018 TOSHIBA TEC CORPORATION All rights reserved
Acceptable
Adjustment
value range
Color
reproduction 0 to 6
selection
Density
adjustment
(Manual 0 to 255
adjustment
(Center value))
Density
adjustment
(Automatic 0 to 255
density
adjustment)
Sharpness
0 to 255
adjustment
Black header
density level 0 to 8
adjustment
2-86
Default Setting value
0: Same as Text/Photo,
printed image, text, map
(text priority) mode
1: Same as Photo mode
2: Same as Red seal color
mode
3: The gray level becomes a
more bluish one than the
one specified in the setting
value "0".
4: The highlight
reproduction becomes more
emphasized than the one
specified in the setting
0
value "0".
5: Same as Text/Photo,
printed image, text, map
(photo priority) mode
6: Text/Photo, printed
image, text, map mode
(equivalent to the setting
value "0" of the base model
(*1): reproduction which
enhances the redness of
skin)
(*1): e-STUDIO2000AC/
2505AC/3505AC/4505AC/
5005AC
The larger the value, the
128
darker the image becomes.
The larger the value, the
128
darker the image becomes.
The larger the value, the
sharper the image
becomes. The smaller the
128
value, the softer the image
becomes and the less moire
appears.
The larger the value, the
darker the header becomes.
0
The smaller the value, the
lighter the header becomes.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
Reference
section
2.4
2.2.2
2.2.2
2.2.2
2.12.1