Toshiba e-STUDIO2010AC Imaging Manual page 135

(2) Select [05 ADJUSTMENT MODE] and change each setting value of the User custom mode in
accordance with the following table so that the image quality required by a user can be obtained.
Color
[05] Code Adjustment
mode
05-7106
05-7134
05-7137
05-7150
Black
05-7189
05-7237
05-7249
05-7252
After setting the value, perform the next procedure.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
Acceptable
value range
Background
0 to 255
adjustment
Density
adjustment
0 to 255
(Manual
adjustment
Density
adjustment
(Automatic 0 to 255
density
adjustment)
ADF noise
reduction level 0 to 200
setting
Gamma
balance 0 to 255
adjustment
Range
correction
adjustment
0 to 1
(Manual
density
adjustment)
Sharpness
0 to 255
adjustment
Blurred/faint
0 to 4
text adjustment
2-81
2.Copier-specific Adjustments
Default Setting value
The larger the value, the
darker the background
128 becomes. The smaller the
value, the lighter the
background becomes.
The larger the value, the
128
darker the image becomes.
The larger the value, the
128
darker the image becomes.
When the value decreases,
the effect of reducing streaks
(set with [ADF Noise
Reduction]) becomes larger.
100 When the value increases,
the effect of reducing streaks
(set with [ADF Noise
Reduction]) becomes
smaller.
The larger the value, the
darker the image of the area
128
surrounding the target area
becomes.
0: Background peak - Fixed
(A background will remain
when its density on an
original is dark.)
1
1: Background peak - Varied
(A background will not
remain when its density on
an original is dark.)
The larger the value, the
sharper the image becomes.
128 The smaller the value, the
softer the image becomes
and the less moire appears.
When a larger value is set,
text and lines become thinner
(faint in text will be
2 suppressed). When a smaller
value is set, they become
thicker (smudges in the text
will be suppressed).
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
Referenc
e section
2.6
2.2.1
2.2.1
2.24
2.2.1
2.22
2.2.1
2.2.1