Commissioning
2.2 STARTER commissioning tool
Making settings in the STARTER commissioning tool
In the STARTER commissioning tool, set the communication via Ethernet as follows (in our
example, we are using the Ethernet interface "Belkin F5D 5055"):
1. Call the menu "Tools > Set PG/PC interface ...".
2. Select the "Access point of the application", and therefore the interface parameter
70
assignment (in the example we use the access point "S7ONLINE (STEP 7)" and the
interface parameterization "TCP/IP(Auto)->Belkin F5D 5055").
Figure 2-7
Selecting the Ethernet interface at the programming device
If the desired interface does not yet exist in the selection list, you can create this.
Commissioning Manual, (IH1), 01/2013, 6SL3097-4AF00-0BP3
Commissioning Manual