Siemens SINUMERIK 840DE sl Commissioning Manual page 539

General settings for the transformation
MD10602 $MN_FRAME_GEOAX_CHANGE_MODE
= 1
Data set for the 1st transformation in the channel
MD24100 $MC_TRAFO_TYPE_1
= 512
MD24110 $MC_TRAFO_AXES_IN_1
[0] = 3
[1] = 4
[2] = 1
[3] = 2
MD24120 $MC_TRAFO_GEOAX_ASSIGN_TAB_1
[0] = 1
[1] = 4
[2] = 3
MD24800 $MC_TRACYL_ROT_AX_OFFSET_1
= 0
MD24805 $MC_TRACYL_ROT_AX_FRAME_1
= 1
MD24810 $MC_TRACYL_ROT_SIGN_IS_PLUS_1
= 1
MD24820 $MC_TRACYL_BASE_TOOL_1[ ]
[0] = 0
[1] = 0
[2] = 0
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
The actual total frame (zero offsets) is recalculated when switching over geometry axes (se‐
lecting - deselecting TRACYL).
Transformer type (512 = cylinder surface transformation without groove side offset)
Channel axis: Infeed axis (tool axis) perpendicular (radial) to the rotary axis
Channel axis: Rotary axis
Channel axis: 1st axis of the machining plane parallel to the rotary axis
Channel axis: 2nd axis of the machining plane
Channel axis: 1st geometry axis
Channel axis: 2nd geometry axis
Channel axis: 3rd geometry axis
Offset of rotary axis for the 1st TRACYL transformation.
Axial offset of rotary axis for the 1st TRACYL transformation.
Sign of the rotary axis for the 1st TRACYL transformation.
Vector of the base tool for the 1st TRANSMIT transformation in XYZ
Technologies and cycles
Frames when switching over geometry
screens
Definition of transformation 1 in the chan‐
nel.
Axis assignment for the 1st transforma‐
tion in the channel
Assignment of the geometry axes to chan‐
nel axes for transformation 1.
21.4 Milling
Z
A
X
Y
X
A
Z
525