Suzuki SY413 Service Manual page 1820

5B-36 ANTILOCK BRAKE SYSTEM (ABS)
1. Grommet
2. Clamp bolt
3. Sensor bolt
INSTALLATION
1) Check that no foreign material is attached to sensor and rotor.
2) Install it by reversing removal procedure.
Tightening Torque
.
(a): 23 N m (2.3 kg-m, 17.0 lb-ft)
CAUTION:
D Do not pull wire harness or twist more than neces-
sary when installing front wheel speed sensor.
D Fit harness grommet to inner fender securely.
3) Check that there is no clearance between sensor and knuckle.