Setting Mode (08); Pm Support Mode - Toshiba e-STUDIO206L Service Manual

•

Setting mode (08)

08 SETTING MODE
20xx-xx-xx xx:xx
CODE DATA
2010
The selected setting codes and the current setting value for each code are output in a list. See the
following page for the setting code (08):
Refer to chapter 15 - "Adjustment Code (05)".
•

PM support mode

PM SUPPORT CODE LIST
20xx-xx-xx xx:xx
UNIT
DRUM
DRUM BLADE
GRID
MAIN CHARGER NEEDLE
CHARGER CLEANING PAD
The number of pages currently output (OUTPUT PAGES/DEVELOP COUNTS), the recommended
number of output pages for PM (PM OUTPUT PAGES/DEVELOP COUNTS), the current drive count
(DRIVE COUNTS) and the recommended drive count for PM (PM DRIVE COUNTS) are output
together with PM units. Use this list for confirming the PM units to be replaced at each PM. See the
following page for PM:
Refer to  P. 7-1 "7. PREVENTIVE MAINTENANCE (PM)".
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
DATA LIST
CODE DATA CODE
2 2880 12 3040
Fig.5-24
OUTPUT PAGES/ PM OUTPUT PAGE/
DEVELOP COUNTS DEVELOP COUNTS
2516 70000
2516 70000
2516 70000
2516 70000
2516 70000
Fig.5-25
5 - 31
S/N: xxxxxxxxx TOTAL:
DF TOTAL:
TOSHIBA e-STUDIOxxx
DATA CODE
0 3070
TOTAL:
S/N: xxxxxxxxx
TOSHIBA e-STUDIOxxx DF TOTAL:
DRIVE COUNTS PM DRIVE COUNTS
11735 170000
11735 170000
11735 170000
11735 170000
11735 170000
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
9999999
9999999
DATA
0
9999999
9999999
SELF-DIAGNOSIS MODES
5