Automatic Original Detection Sensor (S1/S2/S3/S4/S5) - Toshiba e-STUDIO206L Service Manual

4.5.3

Automatic original detection sensor (S1/S2/S3/S4/S5)

[A] A4 series (APS-1, -2, -3, -C, -R)
(1) Take off the lens cover.
 P. 4-26 "4.5.2 Lens cover"
(2) Disconnect 1 connector and remove 1 screw.
Take off APS sensor.
(3) Disconnect 1 connector each, release 2
latches each and take off 4 APS sensors.
[B] LT series (APS-1, -3, -C, -R)
(1) Take off the lens cover.
 P. 4-26 "4.5.2 Lens cover"
(2) Disconnect 1 connector and remove 1 screw.
Take off APS sensor.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-78
Fig. 4-79
Fig. 4-80
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 27
Latch
DISASSEMBLY AND REPLACEMENT
4