File System Recovery Mode (5C) - Toshiba e-STUDIO206L Service Manual

5.11 File System Recovery Mode (5C)

5.11.1 Overview
This is a mode to check if there is any damage to the file system (HDD) and recover it if necessary. Use
this mode only in the following cases:.
There is a possibility of damage to the file system (HDD).
There is an apparent damage to the file system (HDD), requiring recovery or initialization.
This mode enables you to have the following functions:
• Check F/S: Checks the file system.
• Recovery F/S: Recovers the file system.
• Initialize HDD: Initializes HDD.
• Initialize DB: Initializes database such as log data.
• SMART Info: Displays the various information in the HDD.
• DISK Info: Displays the usage rate of HDD.
5.11.2 Operation procedure
[5][C] [Digital key]
[POWER]
(Selection)
Notes:
• Do not turn the main power switch OFF after you select a menu and processing has started
(during processing).
• After the processing is completed, a beep sounds 4 times and either "Completed" or "Failed"
appears on the screen.
Turn ON the power while pressing the [5] and [CLEAR] button simultaneously. The following screen is
displayed.
File System(F/S) Recovery Mode -> Check F/S
Please Select Mode
>1. Check F/S
2. Recovery F/S
3. Initialize HDD
4. Initialize DB
5. SMART Info
6. DISK Info
Remarks:
When the mode is started, "1. Check F/S" is selected by default.
(">" is displayed on the left of the selected number.)
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
[Digital key]
[START]
(Selection)
Fig.5-14
5 - 21
[START] (HDD formatting)
(DB formatting
such as log data)
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
[POWER] OFF/ON
(Exit)
SELF-DIAGNOSIS MODES
5