Before You Start; Charge The Battery - NETGEAR Fuse Get Started

Before You Start

Insert the Battery
1. Remove the back cover using the thumb catch
on the corner of the hotspot.
2. Align the battery's contacts with those inside
the battery compartment and gently press
down until the battery is seated.
3. Replace the back cover.
Note: Your device comes with a micro-SIM card
preinstalled. Do not remove the micro-SIM card.

Charge the Battery

1. Insert the USB cable into the charging
adapter.
2. Insert the small end of the USB cable into
the micro-USB charging port at the bottom
of the hotspot.
3. Plug the charging adapter into a standard
AC power outlet.
Get Ready
1. Make sure you are in an area covered by
the Sprint network (not roaming).
2. Make sure the device you are trying to
connect to your Mobile Hotspot has its
Wi-Fi (wireless network connection) mode
turned on.
3. Make sure your Mobile Hotspot is set up on
your Sprint account. (Sign on to your
account at sprint.com/mysprint to verify.)