Wheel Kit Installation - Honda EM6500SX Owner's Manual

ASSEMBLY

Wheel Kit Installation

1. Install the two wheels on the axle shaft using the plain washers and
split pins.
2. Install the axle assembly on the generator using four 8×16 mm
flange bolts and 8 mm flange nuts.
3. Install the two stands on the under frame using four 8×16 mm
flange bolts.
TORQUE: 17–22 lbf·ft (24–29 N·m, 2.4–3.0 kgf·m)
8×16 mm FLANGE BOLT (8)
WHEEL (2)
STAND (2)
84
AXLE SHAFT
20 mm
PLAIN WASHER (2)
8 mm FLANGE NUT (4)
GENERATOR
SIDE
SHORTER
UNDER FRAME
4.0×28 mm
SPLIT PIN (2)