Honda EM6500SX Owner's Manual page 62

SERVICING YOUR GENERATOR
Battery Installation
1. Install the battery in the generator.
2. Connect the battery positive (+) cable to the battery positive (+)
terminal first and tighten the bolt securely.
3. Slide the battery boot over the positive (+) cable and terminal.
4. Connect the battery negative (–) cable to the battery negative (–)
terminal, and tighten the bolt securely.
5. Install the battery holder band.
6. Install the battery cover in the reverse order of removal (see page
58).
Never operate the generator without the battery cover in place, as
poor engine and generator performance will result.
BATTERY HOLDER BAND
POSITIVE (+)
CABLE
60
NEGATIVE (–)
CABLE