Wheel Kit Installation - Honda EM5000SXK3AN Owner's Manual

Wheel Kit Installation

1. Install the two stands on the under frame using four 8×16 mm flange bolts.
2. Install the two wheels on the axle shaft using the plain washers and split pins.
After installing the split pins, bend the pins to ensure that the wheels are
secured to the axle.
3. Install the axle assembly on the generator using four 8×16 mm flange bolts
and 8 mm flange nuts.
Torque: 19.5 lbf·ft (26.5 N·m, 2.7 kgf·m)
8×16 mm FLANGE BOLT (8)
WHEEL (2)
STAND (2)
AXLE SHAFT
20 mm
PLAIN WASHER (2)
8 mm FLANGE NUT (4)
ASSEMBLY
GENERATOR
SIDE
SHORTER
UNDER FRAME
4.0×28 mm
SPLIT PIN (2)
15